Backup Camera
Has anyone installed a backup camera? Should I go with the Mopar at $495 plus $325 for the sensor or buy the LockPick after market?
Love my 2011 Chrysler 200 Limited... Amy |
Hey Amy, welcome to the forum. Not sure if anyone has done it yet, but it probably similar to most other car setups. Is that dealer rates?
|
Yes, that is the prices without installation...argh!
|
If I buy a license plate backup camera, do I need to wire it through the car or under the chassis? Although I am an experience car stereo installer, I don't want to pull out the interior of my brand new car.
|
Quote:
|
On a 2012 200 with RHR, it initially did not work on my car. I got it all plugged in, carefully tucked wires into cavity under the radio, slid radio back in, re-connected 2 bezel connectors (clock and seats/hazard), went to start car... the car started for a second then shut down. The evic flashed "no bus" as the car auto shut off. Radio never woke up. Wonderful!
I called Coastaletech and they took my name and number saying a tech should call me back today. Thinking I shoulda got the V5. I've seen on "other forums" that folks were able to use the V5 module to connect cameras. What really ticks me off is that I called them before ordering to ensure the CHRY550 would work on a 2012 200 and they told I was good to go. EDIT: Later same day... turns out the instructions that come with the Lockpick were wrong on the settings for dipswitches #2 and #3 on the Lockpick module. The 200 is a "Low Speed" vehicle application not "High Speed' as the instructions lead you to believe. Once I flipped the 2 dipswitches to "on" and reassembled everything, it all worked. |
Quote:
|
Quote:
|
I had the nav tool installed last fall, it works incredibly well, and besides the actual purchase I had a friend wire it in for me, for just a hundred bucks and a case of beer :).
I forgot to mention this wasnt added to my 2011 chrysler 200-but my wifes crossover. I am not sure the Navtool is available for the 200 or not... |
Quote:
|
Quote:
|
All times are GMT -4. The time now is 06:51 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.